UNIOR: Product features
material: premium flex plus carbon steel
surface finish: chrome plated according to ISO 1456:2009
The dimension of the hexagonal key opening is SW10. It enables unscrewing and tightening of nuts of this dimension, while at the same time it can be used to hang the key.
How to use the tool:The wrench is used for unscrewing and tightening of front chain ring nuts. The tightening starts with the broader part, and when the nut is sufficiently tightened, it finishes with the narrower part which is bent in order to enable more secure power transfer during the final tightening of the nut. When unscrewing the nut, the key is used in the reverse order.
UNIOR: Product featuresmaterial: premium flex plus carbon steelHow to use the tool:The wrench is used for installing and removing of older bottom brackets. The wrench fits perfectly in the hand while the slim body and gap form enable quick and efficient installation and removal of older types of bottom brackets. The length of the wrench is 204 mm.
UNIOR: Set Includes;
Awl with round straight blade
Awl with round, 90° bent blade
Awl with round, double bent blade
Awl with round, double bent small blade
UNIOR: How to use the tool:A worn chain shifts poorly and causes undue damage to the sprockets. The tool is a "go, no go" gauge designed to accurately indicate when a chain is worn out.Important!Measurement: from 0 to 0,6% - no chain wear. from 0,7 to 1,2% the chain is worn out and it is necessary to replace it. Product featuresMade from precision, laser cut steel.
UNIOR: Product featuresHow to use the tool:To alleviate poor shifting and uneven drive train wear, most manufacturers recommend chain replacement at or before 0,6% stretch. Now you can quickly and accurately determine the wear and stretch of any chain. Simply insert the chain checker`s pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading.
UNIOR: Product features
material: premium flex plus carbon steel
surface finish: blacken to standard DIN 50938
The wrench is the basic working tool for cyclists extended tours.
How to use the tool:
To change broken spokes on the right side of the rear wheel, the cassette has to be removed first.
Firstly remove the rear wheel, than fit the tool onto the freewheel nut.
Replace the rear wheel, so that the square edge of the tool presses to the frame or derailleur hanger. After that, push the pedals in the forward direction and loosen the freewheel nut. Remove the cassette and replace the broken spoke. In order to prevent the possibility that the paint on the bicycle frame is damaged, a protective plastic plate should be inserted between the key and the frame.
UNIOR: Product featuresThe freewheel remover is used for removing an assembling Campagnolo® freewheels.How to use the tool:Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI
UNIOR: Product features
material: premium flex plus carbon steel
Precise design and hardened to stay sharp. 1695.1AL is used for cutting new left threads before inserting left pedal thread inserts 1695.4A. Pedal tap 1695.1AL removes the old thread before making a new one, so no other tap is needed.
UNIOR: Product features
material: premium flex plus carbon steel
Precise design and hardened to stay sharp. 1695.1AR is used for cutting new right threads before inserting right pedal thread inserts 1695.3A. Pedal tap 1695.1AR removes the old thread before making a new one, so no other tap is needed.
UNIOR: Product features
blade: premium hard chrome vanadium steel, entirely hardened and tempered
blacken tip
handle: ergonomic shape
three component material
hanging hole
made according to standard EN60900
UNIOR: Product features
blade: premium hard chrome vanadium steel, entirely hardened and tempered
blackened tip
handle: ergonomic shape
three component material
hanging hole
made according to standard EN60900
UNIOR: Product features
blade: premium hard chrome vanadium steel, entirely hardened and tempered
blackened tip
handle: ergonomic shape
three component material
hanging hole
made according to standard ISO 8764-1,2 and EN 60900
UNIOR: Product features
blade: premium hard chrome vanadium steel, entirely hardened and tempered
blackened tip
handle: ergonomic shape
three component material
hanging hole
made according to standard EN60900
made according to standard ISO 8764-1,2
UNIOR: Product features
material: premium plus carbon steel
surface finish: blacken to standard DIN 50938
The threadless nut setter is used to install the star fangled nut found on 1" and 1-1/8" threadless headset systems. It is intended for both professionals and home users.
UNIOR: Product features
material: premium flex plus carbon steel
surface finish: blacken to standard DIN 50938
The head set cup remover makes removal of cups 1-1/4" and 1-1/2" from the frame quick and easy
Suitable to remove PressFit 30 (PF30) bottom bracket cups. PF30 bottom bracket cups are pressed in to the frame the same way as the head tube cups and have the same internal diameter.
UNIOR: Product features
material: premium flex plus carbon steel
This tool accurately presses headset cups 1”, 1-1/8”, 1-1/4 ” and 1-1/2” into head tubes. In addition it has a longer spindle for BMX headsets with larger tubing. This precision made tool enables work without damage.
UNIOR: Product features
material: premium plus carbon steel
drop forged, entirely hardened and tempered
This wrench fits the popular spoke nipple flat sizes: 3.3 mm, 3.45 mm, 3.7 mm, 3.96 mm, 4.4 mm and 5mm. The shape adjusts perfectly to the hand and allows a comfortable work and easy grip.
UNIOR: Product features
material: premium flex plus carbon steel
Inner dimension: 9/16 x 20 TPI
Outer dimension: 5/8 x 24 TPI
Pedal thread inserts are used to replace damaged threads in cranks. They are used together with appropriate pedal taps and are available in 10 pcs sets.
