MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 6902
Dimensions: 15mm x 28mm x 7mm
ABEC: 3Â
Grade: 10
Seals: 1ZS
Grease: CRC Marine
Application: Frame Pivots
Weight: 15.85g
The entry standard for Enduro bearings. Enduro's ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro's ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.
Bearing Code: MR 17287 MAX
Dimensions: 17mm x 28mm x 7mm
ABEC: 3
Grade: 10
Seals: LLB
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: 13.30g
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.
Bearing Code: 3800
Dimensions: 10 x 19 x 8
ABEC: 3Â
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Weight: N/A
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.
Bearing Code: 3802
Dimensions: 15 x 24 x 7
ABEC: 3Â
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Weight: 10.5g
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 3900 MAX
Dimensions: 10 x 22 x 10mm
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: N/A
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 608 LLU MAX-EE
Dimensions: 8 x 22 x 7/1-2/10
ABEC: 3Â
Grade: 10
Seals: LLB
Grease: CRC Marine
Application: Frame Pivots
Weight: N/A
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 6804
Dimensions: 20mm x 32mm x 7mm
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: 18.45g
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 6805
Dimensions: 25mm x 37mm x 7mm
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: 21.55g
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 3902
Dimensions: 15 x 28 x 10
ABEC: 3Â
Grade: 10
Seals: LLB
Grease: CRC Marine
Application: Frame Pivots
Weight: 24.81g
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 686
Dimensions: 6 x 13 x 5
ABEC: 3Â
Grade: 10
Seals: LLB
Grease: CRC Marine
Application: Frame Pivots
Weight: 2.61g
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.BO version has a black oxide coating for great corrosion resistance.
Bearing Code: 6000
Dimensions: 10mm x 26mm x 8mm
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: 19.28g
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 6903 LLU MAX-E
Dimensions: 10 x 22 x 6/9
ABEC: 3Â
Grade: 10
Grease: CRC Marine
Application: Frame Pivots
Weight: 19.00g
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: MR 20307
Dimensions: 20mm x 30mm x 7mm
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: 19.28g
Note: Image for illustration only
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.
Bearing Code: B 543 MAX
Dimensions: 1 1/16" x 1.5" x 9/32"
ABEC: 3
Grade: 10
Grease: Kyodo Yushi PS-2
Application: Headsets
Weight: 28.77g
Ceramic-hybrid bearing features deep-groove design 52100 High-Carbon Chromium alloy races, with grade 5 Silicon-Nitride Ceramic balls, ultra-low drag VV dual-lip seals to withstand the outside elements, and to contain the 90% fill Kluber NBU52 ultra-smooth and sticky, water-proof grease. Ceramic balls reduce bearing wear and increase bearing life by eliminating steel on steel contact within the bearing. VV seals are our lightest contact design, allowing for the fastest spinning bearing we make, though not as protective against the elements as our LLB or LLU type seals.The Enduro line of bearings are available in High-Carbon Chromium Steel, 440C Stainless Steel, Ceramic-Hybrid and XD-15 with Ceramic or Stainless Balls. Our bearings are always engineered with deep groove races to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro groove creating a full labyrinth to provide ultimate protection against the elements.
Bearing Code: 697
Dimensions:7mm x 17mm x 5mm
ABEC: 5
Grade: 5
Seals: VV
Grease: Kyodo Yushi PS-2
Application: Hubs, Bottom Brackets
Ceramic-hybrid bearing features deep-groove design 52100 High-Carbon Chromium alloy races, with grade 5 Silicon-Nitride Ceramic balls, ultra-low drag VV dual-lip seals to withstand the outside elements, and to contain the 90% fill Kluber NBU52 ultra-smooth and sticky, water-proof grease. Ceramic balls reduce bearing wear and increase bearing life by eliminating steel on steel contact within the bearing. VV seals are our lightest contact design, allowing for the fastest spinning bearing we make, though not as protective against the elements as our LLB or LLU type seals.The Enduro line of bearings are available in High-Carbon Chromium Steel, 440C Stainless Steel, Ceramic-Hybrid and XD-15 with Ceramic or Stainless Balls. Our bearings are always engineered with deep groove races to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro groove creating a full labyrinth to provide ultimate protection against the elements.
Bearing Code: 697
Dimensions:7mm x 17mm x 5mm
ABEC: 5
Grade: 5
Seals: VV
Grease: Kyodo Yushi PS-2
Application: Hubs, Bottom Brackets
CH MR 19285LB - ABEC-5, Ceramic-Hybrid, radial bearing (C3 clearance) - 19mm x 28mm x 5mm -This ABEC-5, Ceramic-hybrid bearing features deep-groove design 52100 High-Carbon chromium alloy races, with Grade 5 Silicon-Nitride Ceramic balls, dual-lip labyrinth (LLB) seals to withstand the outside elements, and to contain the 90% fill Mobilux NGLI 2 high pressure water proof synthetic grease. Si3N4 Ceramic balls reduce bearing wear and increase bearing life by eliminating steel on steel contact within the bearing.A bit of an oddball size, this bearing generally used as a hub bearing, specifically for Fulcrum rear wheels.The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.
Static load - 428lbf / 1.90kN
Weight - 13.5g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfect preload. Combined with the advanced lightweight nitrogen steel races and oversized grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market. Now with Limited Lifetime Warranty against manufacturing defect.
Bearing Code: ACB 6808 CC
Dimensions: 40mm x 52mm x 6.5mm
ABEC: 5
Grade: 3
Seals: LLB
Grease: Kyodo Yushi PS-2
Application: Headsets
Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.
Bearing Code: 689
Dimensions: 9mm x 17mm x 5mm
ABEC: 5
Grade: 5
Seals: 2RS
Grease: Kyodo Yushi PS-2
Application: Hubs, Bottom Brackets
Replacement Bearings for Cane Creek Headsets.All bearings are cross compatible between all Cane Creek headsets. This means you can upgrade your 40 Series headset to a Hellbender or AER bearing etc.Bearing options:
ZN40 - Durable zinc coated steel cartridge bearing (standard in 40 Series)
Hellbender - Full stainless steel bearing for ultimate durability (standard in Hellbender 70 and 110 Series)
AER - Lightweight hybrid Steel/Aluminium. Maintains the quality and durability our bearings are known for, while shaving 35% of the weight.
Replacement Bearings for Cane Creek Headsets.All bearings are cross compatible between all Cane Creek headsets. This means you can upgrade your 40 Series headset to a Hellbender or AER bearing etc.Bearing options:
ZN40 - Durable zinc coated steel cartridge bearing (standard in 40 Series)
Hellbender - Full stainless steel bearing for ultimate durability (standard in Hellbender 70 and 110 Series)
AER - Lightweight hybrid Steel/Aluminium. Maintains the quality and durability our bearings are known for, while shaving 35% of the weight.
Replacement Bearings for Cane Creek Headsets.All bearings are cross compatible between all Cane Creek headsets. This means you can upgrade your 40 Series headset to a Hellbender or AER bearing etc.Bearing options:
ZN40 - Durable zinc coated steel cartridge bearing (standard in 40 Series)
Hellbender - Full stainless steel bearing for ultimate durability (standard in Hellbender 70 and 110 Series)
AER - Lightweight hybrid Steel/Aluminium. Maintains the quality and durability our bearings are known for, while shaving 35% of the weight.
Stainless steel version of the 36x45 angular contact bearing. Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.
Bearing Code: 36 x 45
Dimensions: 30.5 x 41 x 6.5mm
Contact Angle: Inner 36 degree, Outer 45 degree
ABEC: 3Â
Grade: 10
Seals: LLB
Grease: Kyodo Yushi PS-2
Application: Headsets
Weight: 19.24g
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.
Bearing Code: 6804
Dimensions: 19 x 30 x 6.5mm
ABEC: 3Â
Grade: 10
Seals: LLB
Grease: Kyodo Yushi PS-2
Application: Headsets
Weight: 13.50g
