Ritchey: You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.The WCS C22 84D Stem offers 6° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness.The stem body is forged 2014 aluminum for further weight reduction. Premium quality stainless steel black bolts are used throughout.
6° of positive or negative rise
Stem body wraps 220° around bar clamping area, holding it in place for easy installation
Material: 2014 alloyBolts: stainless steel blackLengths: 60-140mmAngle: 84°/6°Bar clamp diameter: 31.8mmBar clamp width: 44mmSteerer height: 42mm (1-1/8") - 44mm (1-1/4")Weight: 132g (100mm - 1-1/8")Colour: Blatte Warning: 1-¼ stems ship with a cosmetic spacer. This is NOT a shim to fit 1-1/8 steerers
Ritchey: You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.The WCS C22 84D Stem offers 6° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness.The stem body is forged 2014 aluminum for further weight reduction. Premium quality stainless steel black bolts are used throughout.
6° of positive or negative rise
Stem body wraps 220° around bar clamping area, holding it in place for easy installation
Material: 2014 alloyBolts: stainless steel blackLengths: 60-140mmAngle: 84°/6°Bar clamp diameter: 31.8mmBar clamp width: 44mmSteerer height: 42mm (1-1/8") - 44mm (1-1/4")Weight: 132g (100mm - 1-1/8")Colour: Blatte Warning: 1-¼ stems ship with a cosmetic spacer. This is NOT a shim to fit 1-1/8 steerers.
Ritchey: You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.The WCS C220 73D Stem offers 17° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness.The stem body is forged 2014 aluminum for further weight reduction. Premium quality stainless steel black bolts are used throughout.
17° of positive or negative rise
1-1/8" steerer diameter
Stem body wraps 220° around bar clamping area, holding it in place for easy installation
Material: 2014 alloyBolts: stainless steel black Lengths: 70-130mmAngle: 73°/17°Bar clamp diameter: 31.8mmBar clamp width: 44mmSteerer diameter: 1-1/8" (28.6mm)Steerer height: 45mmWeight: 134g (100mm)Colour: Blatte
Ritchey: Pro caliber features at a real-world racer price. This 3D net forged 6061 aluminum stem offers +/- 30 degrees of stem angle for riders wanting a more comfortable fit. The angled steer tube clamp slot reduces stress on carbon steer tubes. Material: 6061 alloyBolts: stainless steelLengths: 60-120mmAngle: +/-30°Bar clamp diameter: 31.8mmBar clamp width: 40mmSteerer diameter: 1-1/8" (28.6mm)Steerer height: 45mmWeight: 136g (90mm)Colour: BB black
Ritchey: With its unique faceplate design, the Ritchey 4-Axis stem was a game-changer when it was first released many years ago. Today, the Comp 4-Axis 44 stem offers a wider 44mm faceplate and continues to offer world-class performance and unparalleled reliability that's unmatched at a similar price-point.
Designed specifically for 1-1/4" steerer
44mm-wide faceplate
Stylish new Comp graphics
Material: 6061 alloyBolts: stainless steelLengths: 60-130mmAngle: 73°/17°Bar clamp diameter: 31.8mmBar clamp width: 44mmSteerer diameter: 1-1/4" (31.8mm)Steerer height: 44mmWeight: 146g (100mm)Colour: BB black Warning: 1-¼ stems ship with a cosmetic spacer. This is NOT a shim to fit 1-1/8 steerers
Ritchey: With its unique faceplate design, the Ritchey 4-Axis stem was a game-changer when it was first released many years ago. Today, the Comp 4-Axis-44 stem offers a wider 44mm faceplate and continues to offer world-class performance and unparalleled reliability that’s unmatched at a similar price-point. This stem also features a new aesthetic with updated Comp graphics for 2020.
Designed specifically for 1-1/8" steerer
44mm-wide faceplate
Stylish new Comp graphics
Material: 6061 alloyBolts: stainless steelLengths: 60-130mmAngle: 84°/6°Bar clamp diameter: 31.8mmBar clamp width: 44mmSteerer diameter: 1-1/8" (28.6mm)Steerer height: 42mmWeight: 128g (100mm)Colour: BB black
Ritchey: The Ritchey Adjustable 4-Axis Stem features a precision 3D-Net shaped forged shaft interconnected with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. DIal-in the perfect height for your bars! Material: 6061 alloyBolts: stainless steelLengths: 90, 105, 120mmAngle:+/-55-degree range of height adjustabilityBar clamp diameter: 31.8mmBar clamp width: 42.5mmSteerer diameter: 1-1/8" (28.6mm)Steerer height: 40mmWeight: 228g (105mm)Colour: BB black
Ritchey: Free up bar space and secure your GoPro, Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated.
Compatible with Ritchey C220 (WCS / Classic / Trail), Toyon and 4-Axis 44 stem handlebar clamps
Forged and machined alloy
Includes extended-length hardware
Leatt: HARDCORE DH DIRECT-MOUNT STEM Fully CNC-machined out of 7075 aluminum, Leatt's direct mount DH stem is adjustable in length and height (5mm each) to finetune your cockpit. It has an extra-wide clamping (70mm) for maximised control and steering precision. The zero-gap faceplate and 200∞ handlebar wrap distribute the clamping force evenly, and a chamfering around the handlebar clamping area reduces stress on the handlebar during load-bearing.The interlocking faceplate interface makes installation a breeze. The stem, depending on the bolting position, is 45mm or 50mm long and weighs 174 grams (including bolts but excluding the 5mm height adjustment spacer plate - which weighs 20 grams).
Precision CNC-machined from 7075 aluminum
Lightweight design without compromising on strength
Attaches directly to a triple clamp/DH fork for sharper and more precise steering
Adjustable in length and height (5mm each) to customize your fit
The zero-gap faceplate and 200∞ handlebar wrap securely hold the handlebar, distributing clamping force evenly
Our interlocking faceplate interface increases strength and makes installation easy
Chamfering around the handlebar clamping area reduces stress on the handlebar during load-bearing
Extra-wide 70mm clamping platform for unparalleled control and steering precision
Weight: 174g including bolts, but excluding 5mm height adjustment spacer (20grams)
Truvativ: If big hits and bone-jarring descents are your idea of a good time, you need a stem that can hang.Forged from super-strong 6061 alloy and capable of withstanding whatever abuses your trails dish out, Hussefelt is the stem for those who just want to forget about it and ride. This is no-brainer DH, freeride or all-mountain performance at a reasonable cost.It features a 2-bolt steerer clamp and 4-bolt handlebar clamp, plus an all-new look with updated graphics, all at a weight of just over 200g.
Truvativ: If big hits and bone-jarring descents are your idea of a good time, you need a stem that can hang.Forged from super-strong 6061 alloy and capable of withstanding whatever abuses your trails dish out, Hussefelt is the stem for those who just want to forget about it and ride. This is no-brainer DH, freeride or all-mountain performance at a reasonable cost.It features a 2-bolt steerer clamp and 4-bolt handlebar clamp, plus an all-new look with updated graphics, all at a weight of just over 200g.
Truvativ: If big hits and bone-jarring descents are your idea of a good time, you need a stem that can hang.Forged from super-strong 6061 alloy and capable of withstanding whatever abuses your trails dish out, Hussefelt is the stem for those who just want to forget about it and ride. This is no-brainer DH, freeride or all-mountain performance at a reasonable cost.It features a 2-bolt steerer clamp and 4-bolt handlebar clamp, plus an all-new look with updated graphics, all at a weight of just over 200g.
Truvativ: If big hits and bone-jarring descents are your idea of a good time, you need a stem that can hang.Forged from super-strong 6061 alloy and capable of withstanding whatever abuses your trails dish out, Hussefelt is the stem for those who just want to forget about it and ride. This is no-brainer DH, freeride or all-mountain performance at a reasonable cost.It features a 2-bolt steerer clamp and 4-bolt handlebar clamp, plus an all-new look with updated graphics, all at a weight of just over 200g.
Truvativ: The Atmos 7k stem is a lightweight, performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, it is also available in 6 different lengths depending on your sizing needs. All fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount.FEATURES
40, 50, 60, 70, 80, 90mm lengths
±6° angle
Integrated GoPro mount
T25 fasteners for 1 tool across the cockpit
SPECIFICATIONSMaterial (SP/ST): Al-7050Stem angle/rise: 6 degreesClamp diam: 31.8mmSteerer clamp diameter: 1-1/8 inColor/finish (ST): Blast BlackHardware: Steel
DEITY: 31.8mm CLAMP / 50mm LENGTH / 100% BADASS DEITY’s all new INTAKE DIRECT MOUNT DH Stem takes machining and flow to another level! It is the perfect analogy for the direction DEITY is going and we’ve left no stone unturned with all the designs we offer today. Yet another premium race good designed to make your kit look amazing and perform even better, the INTAKE DM stem is available in a 31.8mm bore and, like it’s counterpart the INTAKE 35mm DM Stem, it utilizes a 3-piece design for ease of installation and a super stiff set-up. This DEITY design is the culmination of form and function and hit’s the sweet spot for your cockpit!
DIRT MAG Top 100 Product!
Featuring a 50mm reach
Zero degree rise to keep you low and in control
CNC Machined from a solid block of aluminium
Boxxer Standard platform
7075 T73 Aluminium
Available in NEW two tome black high polished ano finish - Black Edition
31.8mm bore clamp for the perfect complement to our new BLACKLABEL 800 Handlebar
69mm wide clamping platform for an incredibly stiff front end
Also available in a 35mm version… our INTAKE 35 DM Stem
Covered by our Lifetime Crash Replacement Policy to the original owner
146 grams
All New INTAKE DM Stem brings impeccable style and strength to your DH kit!
DIRT MAG Top 100 Product for 2018!
Featuring a 50mm reach
Zero degree rise to keep you low and in control
CNC Machined from a solid block of aluminum
Boxxer Standard platform
7075 T73 Aluminum
Available in high polished black ano finish
Graphic choice of stealth, white, red, green, blue, orange and our platinum ano finish with phantom graphics
31.8mm bore clamp for the perfect complement to our new BLACKLABEL 800 Handlebar
69mm wide clamping platform for an incredibly stiff front end
Also available in a 35mm version… our new INTAKE 35 DM Stem
Covered by our Limited Lifetime Warranty and Lifetime Crash Replacement Policy
146 grams
DEITY: 35mm CLAMP / 50mm LENGTH / 100% BADASS Inspired by the aggressive lines and flowing silhouette of our favorite muscle cars, the all new INTAKE 35mm DIRECT MOUNT DH Stem is both fast and furious! This beauty is the perfect match for our new HOLESHOT 35mm DH Handlebar and together they are unlike anything you’ve seen. Delivering unmatched strength, style and attention to detail, this super stiff design showcases the refined direction DEITY is heading. Make no mistake, the added control and response of the ultra-wide 69mm clamping platform will take seconds off your time!
DIRT MAG Top 100 Product!
Featuring a 50mm reach
Zero degree rise to keep you low and in control
CNC Machined from a solid block of aluminium
Boxxer Standard platform
7075 T73 Aluminium
Available in high polished ano finish
Graphic choice of stealth, red, platinum, and NEW black edition (two tone black)
69mm wide clamping platform for an incredibly stiff front end
Also available in a 31.8mm version… our INTAKE 31.8 DM Stem
Covered by our Lifetime Crash Replacement Policy to the original owner
145 grams
All New INTAKE 35 DM Stem brings DEITY’s strength to your DH kit!
DIRT MAG Top 100 Product for 2018!
Featuring a 50mm reach
Zero degree rise to keep you low and in control
CNC Machined from a solid block of aluminum
Boxxer Standard platform
7075 T73 Aluminum
Available in high polished black ano finish
Graphic choice of stealth, white, red, green, blue, orange and our platinum ano finish with phantom graphics
35mm bore clamp for the perfect complement to our new HOLESHOT 35 Handlebar
69mm wide clamping platform for an incredibly stiff front end
Also available in a 31.8mm version… our new INTAKE 31.8 DM Stem
Covered by our Limited Lifetime Warranty and Lifetime Crash Replacement Policy
145 grams
DEITY: The DEITY Copperhead Stem stands as the benchmark for premium MTB cockpit performance — ranked #1 by Vital MTB for its unbeatable blend of strength, precision, and refined design. Machined from a single block of 6061 T6 aluminium, the Copperhead delivers razor-sharp steering and rock-solid control while maintaining a featherweight build light enough for all-mountain and strong enough for slopestyle. Its super-low stack height and wide 55 mm clamping platform provide a confident, balanced feel, while the signature high-polish anodised finish and laser-etched detailing showcase DEITY’s renowned craftsmanship.Features • Vital MTB #1 ranked stem for ultimate strength-to-weight performance • CNC-machined from a solid block of 6061 T6 aluminium • Super-low 30 mm stack height for a compact, aggressive cockpit setup • 55 mm wide clamping platform enhances stiffness and steering precision • Available in 35 mm, 42 mm, and 50 mm lengths • Super high-polish anodised finish with laser-etched Copperhead graphics • Exceptionally detailed chamfered edges and sculpted channels • MTB stem of choice for Specialized S-Works models • Full anodised colour range for seamless DEITY kit integrationSpecifications Model: Copperhead Stem Clamp Material: CNC-machined 6061 T6 aluminium Clamp Diameter: 31.8 mm Stack Height: 30 mm Platform Width: 55 mm Lengths: 35 mm / 42 mm / 50 mm Finish: Super high-polish anodised Colours: Black, Bronze, Red, Purple, Blue, Orange, Liquid Silver Weight: 135 g (35 mm) / 158 g (42 mm) / 161 g (50 mm)
VITAL MTB #1 Ranked Stem
Light enough for All Mountain yet strong enough for slopestyle and everything in between
CNC machined from a solid block of 6061 T6 aluminum
Exceptionally detailed chamfered edges and channels throughout
Super low 30mm stack height
31.8mm bore
Available in 35mm, 42mm, and 50mm lengths
Super High Polished finish
55mm wide clamping platform
Full Ano color range available in black, bronze, red, purple, blue, orange and liquid silver
Lasered graphics
The MTB stem of choice for the Specialized S-Works Models
Weight: 135/158/161 grams
DEITY:
VITAL MTB #1 Ranked Stem
The Award Winning Copperhead in a 35mm Platform
Light enough for All Mountain yet strong enough for slopestyle and everything in between
CNC machined from a solid block of 6061 T6 aluminum
Exceptionally detailed chamfered edges and channels throughout
Low 33mm stack height
Available in 35mm, 42mm, and 50mm lengths
55mm wide clamping platform
Designed for 1 1/8” steerer tubes
High polished Ano finish
Full Ano color range available in black, red, purple, blue, orange, bronze and liquid silver
Lasered graphics
Covered by our Lifetime Crash Replacement Policy to the original owner
Weight: 151/160/179 grams
