Orange Seal’s rim tape comes in 18mm and 24mm widths fitting most rims and provides an airtight seal to turn your rims tubeless.The elasticity of the tape allows greater flexibility in fitting different types of rims.
11m roll seals approximately 2 rims
55m roll seals approximately 15 rims
The original crankbrothers tool range. Compact and lightweight tools for any eventuality. Whether its making a minor adjustment or an on the trail repair these tools have you covered.
Frame: 6061-T6 aluminium
Tools: 6150 high tensile steel
Warranty: Lifetime
Weight: 168g
Length: 3.5†/ 89mm
Chain tool: 8/9/10 speed compatible
Spoke wrench: #0,1, 2, 3
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Screwdrivers: Phillips, flat
Open wrench: 8mm, 10mm
Torx: T-25
Designed for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Adaptor kits are supplied with full extraction and insertion fittings. For more information on adaptor kits see the below table.NOTE - Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole
BRT-040Â - Toolkit for BB bearing removal and installation, and hub bearing removal. For use with BRT-060 and BRT-050 bearing presses. This kit expands upon the functionality of the BRT-060 and BRT-050 bearing presses to allow for the gentle removal and installation of BB bearings and hub bearings by utilizing the nut and threaded rod from the bearing press to oress the bearing from the component. This is ideal for bearings like stainless steel and XD15 that can be removed and cleaned over and over again, should they become rough and gritty with dirt. This kit includes cups, guides and pullers to allow for the removal and installation of all sizes of BB and hub bearings when used in conjunction with the BRT-060 or BRT-050 bearing presses. Please note that the receiver cups provided for removing hub bearings are intended for use with hubs that feature axle stops. This toolkit features many cross compatible parts with the BRT-003 24mm BB press tool that overlap the functionality of BRT-002 (30mm BB) and the BRT-016 (29mm DUB BB).
The completely redesigned Pro 2.0 Cable Crimper and Cutter features updated cutting geometry and smooth cable tip crimping action.
The cutting blades are optimized to maximize leverage when cutting 0.8-1.6mm inner cables,
ensuring smooth, clean cuts
The redesigned crimping function has three blades that contract as the handle is closed,
utilizing a mimimal size to crimp tips on hard-to-reach cables
The ergonomic handles ensure comfort for all-day use
Thumb latch allows the tool to be opened or locked closed with just one hand
For maintenance jobs where accuracy is paramount! Includes a brand new Heavy Duty Ratchet Tool, a complete set of tool bits and a new digital torque wrench to satisfy your need for precise torque.The Torque Stick Digital enables you to preset the torque required down to 0.1Nm. With its digital backlit display and both audible and vibrating alerts when you reach your desired torque this is the professional mechanics tool of choice for the most accurate jobs.
Functions: 22
Tools:
Hex bits: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm
Torx® bits: T10 / T15 / T20 / T25 / T30 / T40
PH1, PH2Â
Flat head bitsÂ
Torq Stick Digital (1-20 Nm)
Ratchet Rocket HD Toolbar (Max. 60Nm)
Speed sleeve bit holder
8mm open-end wrench with valve tool
Material: Aluminium / Engineering grade polymer / S2 hardened steel
Size: 25 x 9.6 x 6 cm
Weight: 630 g
Stainless Steel Bearing Pullers for bearings with specific bearing IDsProfessional quality, heat-treated stainless steel, replacement puller for use with the BBT-222, BBT-200 and BBT-100 Blind-Hole Puller Sets. This is the same stock puller that comes with the BBT-222 took kit.
Elite mineral oil bleed kit replacement fittings.
Elite Mineral Oil Bleed Kit fittings for Shimano®, Tektro®, TRP®, Magura®, and Campagnolo®
Red seals for mineral oil
One set of 12 fittings plus tool
Pro mineral oil bleed kit replacement fittings.
Mineral oil bleed kit replacement fittings for Shimano®, Tektro®, and Magura®
Red seals for mineral oil
One set of 8 fittings
Replacement Shimano nipple fitting for Pro Bleed Kit.
Fitting to adapt Jagwire Pro Mineral Oil Bleed kit directly to Shimano® nipple-style bleed portsl
Single fitting
The Brake Pad Tuner makes installing rim brake pads a breeze. Use to set pad position and toe-in on rim brake pads. Works with road or mountain rim brake pads.
Sturdy aluminum body resists fLEXing, ensuring years of reliable use. Cutting slot is shaped to secure the hose and ensure a perpendicular cut. Replaceable cutting blades.
Installing hydraulic hose fittings shouldn’t be done using a hammer. The Jagwire Pro and Sport Needle Drivers ensure proper alignment of the needle fitting, making installation quick and easy. Quickly installs needle inserts with a squeeze of the handle. 2-way clamp fits 5.0 and 5.5mm hydraulic hose and features adjustable tension. Needle Starter pin to quickly and confidently set needle insert into hose. Textured handle grip for comfortable operation. For use with unthreaded needle inserts.
Jagwire's Pro Internal Routing Tool simplifies routing through a frame, using powerful magnets to safely and easily guide inner cables, housing, hydraulic hose, and e-shift wires. A retractable, fLEXible magnet can be inserted into the receiving end of an internal cable run to find the magnetic adapter and easily pull it through. Adapters for inner cables, hydraulic hose, and Di2 e-Tube wires are included. The adapters nest neatly inside tool body when not in use.
